Raypak 185 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Chaudière à eau Raypak 185. Raypak 185 User Manual [it] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 14
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
OPERATING AND
INSTALLATION
INSTRUCTIONS
Models
185, 265, 335, 405
Swimming Pool and Spa Heaters
181/182, 260/261, 330/331, 400/401
Water Heaters and Boilers
D-2 POWER VENT
(FOR ELECTRONIC IGNITION MODELS ONLY)
CATALOG NO. 6000.57D
Effective: 10-26-06
Replaces: 03-15-03
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids or other combustible
materials in the vicinity of this or any other appliance. To do so may result in an explosion
or fire.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause
property damage, personal injury or loss of life. Refer to the user’s information manual
provided with this heater. Installation and service must be performed by a qualified in-
staller, service agency or the gas supplier.
FOR YOUR SAFETY
WHAT TO DO IF YOU SMELL GAS:
· Do not try to light any appliance.
· Do not touch any electrical switch; do not use any phone in your building.
· Immediately call your gas supplier from a neighbor’s phone. Follow the gas
suppliers instructions.
· If you cannot reach your gas supplier, call the fire department.
This manual should be maintained in legible condition and
kept adjacent to the appliance or kept in a safe place for
future reference.
P/N 241086 Rev. 1
Vue de la page 0
1 2 3 4 5 6 ... 13 14

Résumé du contenu

Page 1 - D-2 POWER VENT

OPERATING ANDINSTALLATIONINSTRUCTIONSModels185, 265, 335, 405Swimming Pool and Spa Heaters181/182, 260/261, 330/331, 400/401Water Heaters and BoilersD

Page 2 - POWER VENT ASSEMBLY

181-261 WH1 (Low NOx)10

Page 3 - Fig #9372

SEQUENCE OF OPERATIONOn call for heat, the D-2 Power Vent fan (and appliance pump) start. When the flow switchcircuits close, the ignition system co

Page 4

START UP PROCEDURESThe water system, the gas system and theelectrical system for the heater should becompleted and checked as per the heaterinstallati

Page 5 - Fig #9357

ILLUSTRATED PARTS LIST13123456789101112131415

Page 6

Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 FAX (800) 872-9725Raypak Canada LTD, 2805 Slough Street, Mississauga, Ontario, Cana

Page 7

POWER VENT ASSEMBLYINSTALLATION, START-UP AND OPERATION1. RECEIVING EQUIPMENTOn receipt of your equipment it is suggested that you visually check for

Page 8

33. INSTALLATION REQUIREMENTSThe equipment must be installed in accordance with local codes, or in the absence of local codes with thelatest edition o

Page 9 - 182-260 WH1 (ATMOSPHERIC)

4WIRING A POWERVENT ASSEMBLY TO AN APPLIANCE WITH IID IGNITION.WARNING: Disconnect all electrical power to the unit before servicing to avoid potentia

Page 10 - 181-261 WH1 (Low NOx)

VENTINGThe vent pipe must be the same size or larger than what is indicated. The D-2 Power Vent arecapable of 360-degree discharge rotation and opera

Page 11 - SEQUENCE OF OPERATION

6The Raypak Power Vent operates with a positive vent static pressure and with a vent gastemperature that avoids excessive condensate production in the

Page 12 - FIG #9359

7 185-405 POOL HEATER (ATMOSPHERIC)

Page 13

8 185-405 POOL HEATER (Low NOx)

Page 14 - Litho in U.S.A

9 182-260 WH1 (ATMOSPHERIC)

Modèles reliés 405 | 265 |

Commentaires sur ces manuels

Pas de commentaire